project maria parts....

[charlie_mini]

as some of you may know,, the project is now getting to the part were i paint and throw her back together! (at last!) how ever..... some of the parts have either gone adrift or been water damaged (flooded tubs! :() over the last 2 years so before i raid the autojumble @ bingley i thought i'd see if anyone had any of the parts i need.... i'd much prefer someone in the club's mini to benefit from a couple of quid than a random noboddy! :)

this is my shopping list for bingley... if anyone can help before that give me a shout! :) cheers
:

- radiator
- wiper motor
- headlight switch
- headlining
- hif44 (with vac advance- mine is a metro with no advance!)
- 4 standard arches
- drivers door (condition not important - its the fixings <its the lock& winder mechisms i need etc rather than the actual door!)


surely there will be more to follow! :)
cheers
:D

[Gr4H4m]

Eric you can get a vac plate that sits between the carb and inlet from minispares. I have one on my bike carb setup to equalize the pressure behind the bearings when on boost.

[Gr4H4m]

heres the chap

http://www.minispares.com/Product.aspx?ty=pb&pid=36947&title=MANIFOLD%20ADAPTOR%201.75

or for smaller carbs

http://www.minispares.com/Product.aspx?ty=pb&pid=34395&title=MANIFOLD%20ADAPTOR%201.5

[charlie_mini]

i looked at that but wasnt sure it would work for vac-advancin the dizzy.. cheers dude!

[nutter]

i got some standard plastic wheel arches off mine?

[Minitechnique]

Hi, I sure we can help you with your items, we are open Saturday 9-4pm. Mon - Fri 9-5pm. 01253 790189 www.minitechnique.com