desperate help

[tafftats]

im doing up a mini city on a F plate ive just put deep dis alloys on 12x5 and they are hiting the front when on left hand down only on driver side ,we found tie bar was bent so put on adj tie bars on still no good,we fround that the drivers side wheel was about a 1" forward compared to the other side so dont no why this is is im desperate if any one has any ideas,
has to what could be bent
im new to this site so thanks to all who reply cheers

[Deano]

Hi welcome to the forum It could be a few things

front panel bent

tie bars bottom arms bent

tracking out

front subframe front tie bar mount bent

suspension arm bushe`s gone

different tyre Make/size

hope this helps

Cheers Deano

[tafftats]

thanks ive changed the tie bars havnt done tracking will give that ago and replace all the bushes thanks

[Deano]

Thinking on as I've had the same problems in the past it was my suspension ride height as the drivers side cone usually collapses more than passenger side well they do when 20 stone jumps in & out all the time.

Anyway cut a long story short I fitted hilos and problem solved

[tafftats]

great thanx will fit hi los how hard a job is it to fit the front 1s

[Deano]

can be very tricky :o

[tafftats]

i thought so how about fitting coil overs on the front are they any better