PDA

View Full Version : It's all up for grabs


naijaman
26-05-2009, 03:37 PM
Garage clearance:
I have the following items to get rid of;most of them are giveaways but small donations/anything will be appreciated.
2 axle stands
2 sets wheel ramps
2 hydraulic jacks
I would like to regain something for these two items as they are recently purchased and had little use.
1 bench grinder (wheel and brass wire brush)
1 large angle grinder
For the twin carb and dizzy purist
1 Crypton carb balancer ( in original box with instructions )
1 distributor dwell meter ( Ditto )
11 row oil cooler
electronic rev counter ( of shabby appearance--it may even work !!)
There are a number of other items ( all keep they may be of use one day !!!)
half gall of Waxoyl + spray
box of assorted jubilee clips all usable some HD stainless
plus many bits and pieces.
If they don't go to a good home then they are off to the big skip in the sky

if you have an interest call me and come and have a look, you just might wind up with something you have always promised yourself. ???

tel--01352 750439 or mobile (if I can remember where I've put the thing)
07792688142

Mini_City91
01-06-2009, 07:44 PM
i was just wondering how much you want for the oil cooler and where you are based

ROADRUNNER
02-06-2009, 11:06 PM
I am interested in the jacks, dwell meter and carb balancer, could you pm me with prices
Cheers

98kieran
07-07-2009, 05:18 PM
hello how much for the 1 bench grinder (wheel and brass wire brush) and how big is the wheel eg is it a 6inch r 8 inch ect . 1 large angle grinder , wot is the biggiest disc wil it take ? and where abouse r u so i could pick up ?

naijaman
08-07-2009, 12:14 PM
To all interested parties, SORRY, thats a big one, my fault (it usually is), should have posted this last week, but everything is gone.