Steve
15-10-2008, 12:56 PM
As some you may know already. We have been looking for a mini for Rhys.
A couple of months ago we took in a mini from Neil. The mini is E reg Mini City 998cc, which we are going to build up for Rhys ready for next year.
The sole design for the car is going to be down to Rhys plus the cost of all the parts etc.
When we got the mini the paintwork looked like somebody that put sandpaper on it as it had been painted with a glitter. So we decided the best way round this was to strip all the paintwork from the car.
We have already replaced the n/s outer sill and the boot floor, boot hinge panel and rear valence.
As we got more into striping the paintwork from the car, we started to find a few hole into front wings etc. So now it as had all the front removed.
The mini was going to a nice easy job to do. But now, as the front end is been cut off , we are going to flip front it. We have decided to make it into a possible show car.
Here are some photos of where we are up to.
http://i7.photobucket.com/albums/y253/swdonnelly/DSC_3495-1.jpg
http://i7.photobucket.com/albums/y253/swdonnelly/DSC_3497-1.jpg
http://i7.photobucket.com/albums/y253/swdonnelly/DSC00050.jpg
http://i7.photobucket.com/albums/y253/swdonnelly/DSC00041.jpg
http://i7.photobucket.com/albums/y253/swdonnelly/DSC00045.jpg
http://i7.photobucket.com/albums/y253/swdonnelly/DSC_3611.jpg
http://i7.photobucket.com/albums/y253/swdonnelly/DSC00045.jpg
http://i7.photobucket.com/albums/y253/swdonnelly/DSC_3615.jpg
http://i7.photobucket.com/albums/y253/swdonnelly/DSC_3618.jpg
http://i7.photobucket.com/albums/y253/swdonnelly/DSC_3619.jpg
A couple of months ago we took in a mini from Neil. The mini is E reg Mini City 998cc, which we are going to build up for Rhys ready for next year.
The sole design for the car is going to be down to Rhys plus the cost of all the parts etc.
When we got the mini the paintwork looked like somebody that put sandpaper on it as it had been painted with a glitter. So we decided the best way round this was to strip all the paintwork from the car.
We have already replaced the n/s outer sill and the boot floor, boot hinge panel and rear valence.
As we got more into striping the paintwork from the car, we started to find a few hole into front wings etc. So now it as had all the front removed.
The mini was going to a nice easy job to do. But now, as the front end is been cut off , we are going to flip front it. We have decided to make it into a possible show car.
Here are some photos of where we are up to.
http://i7.photobucket.com/albums/y253/swdonnelly/DSC_3495-1.jpg
http://i7.photobucket.com/albums/y253/swdonnelly/DSC_3497-1.jpg
http://i7.photobucket.com/albums/y253/swdonnelly/DSC00050.jpg
http://i7.photobucket.com/albums/y253/swdonnelly/DSC00041.jpg
http://i7.photobucket.com/albums/y253/swdonnelly/DSC00045.jpg
http://i7.photobucket.com/albums/y253/swdonnelly/DSC_3611.jpg
http://i7.photobucket.com/albums/y253/swdonnelly/DSC00045.jpg
http://i7.photobucket.com/albums/y253/swdonnelly/DSC_3615.jpg
http://i7.photobucket.com/albums/y253/swdonnelly/DSC_3618.jpg
http://i7.photobucket.com/albums/y253/swdonnelly/DSC_3619.jpg