high beam??

[papnip]

my hubby has got all the lights in and working but he cannot get the high beam (flashers) to work, also the hazard lights and rear head,:confused:
any ideas guys?
thanks

[denty]

hi there the high beam flash on mine did not work to it was the contacts it the stalk that needed a clean if that helps

[papnip]

oh he didnt htink of that one, he will give it a go.
cheers

[TONYELF]

I had a similar problem on the studio 2. Previous owner had taken the steering column cowl off and re-fitted it too far down .This prevented the flasher stalk from coming up high enough to make the contact.:mad:

[papnip]

it did work before we put her in the garage 2 yrs ago, and when we try it now the clock lights flash but nothing from the headlights :confused:
as said before weve put in new headlamps so dont no if its due to this????

[Gr4H4m]

Are you getting voltage to the contacts on the stalk.?

[Deano]

try all the bullet conectors to the headlamps give them a wiggle & a clean:) also make sure you have a good earth.

[papnip]

hey peeps got it sorted after about 4 hrs of searching, it was the little metal prong things that connect the wire to the stalk it was bent backwards onto another wire :mad: .
but at least its done at last.
thanks for all the suggestions they were all tried and tested.
take care

[TONYELF]

That's good, 12 volt electrics can be a right pain. Glad you got it sorted:)