PDA

View Full Version : hazzard switch

olly_16
06-02-2007, 12:07 AM
it did work for a while then i had problems with the light not workin and that and since then the hazzard switch dont work could this be that its broke or a fault in the circut?
Gr4H4m
06-02-2007, 05:52 PM
anything else not working? if so it might be a fuse. you could use a multi meter to test if the switch is working.
mervyn51
06-02-2007, 08:40 PM
Quite a common fault on the mini usually causes probs with indicators aswell not to exspensive to buy new
Deano
06-02-2007, 08:48 PM
Have allways had hazard light problems :( when i go to a show i usually buy i few switches just so i can plug one in to try it but have none left as it seems such a common problem.

Recheck all fuse conections and remove the fuse block and clean all the conections at the back will help with all the electrics dont forget the In-line fuses too:p
olly_16
07-02-2007, 07:27 PM
i have done all that. everything else works fine except the hazzard switch. so you rekon just buy a new switch
TONYELF
08-02-2007, 09:32 AM
i have done all that. everything else works fine except the hazzard switch. so you rekon just buy a new switch

Yep! (You could try cleaning the contacts inside if you can open it. What have you got to lose?);)
Deano
08-02-2007, 01:02 PM
Yep! (You could try cleaning the contacts inside if you can open it. What have you got to lose?);)


Your indicators! i would leave the switch well alone and get a new one there allmost imposible to put back together and you may end up with no indicators.
TONYELF
08-02-2007, 05:46 PM
Sorry Ollie, boss knows best