PDA

View Full Version : Camshaft Information

redmini
18-01-2007, 08:05 PM
Evening all, does anybody know the timing figures etc for a KC 600 SB cam please? It's for a classic mini and is fitted in my turbo to my suprise:confused: , I was led to believe it was a phase2 but there you go :) I phoned a few places today but they were of no real help (normally after asking if I'd purchased it from them!!!) Any help will be appreciable as I want to finish it tomorrow :eek:
charlie_mini
18-01-2007, 08:17 PM
whats the SB? guessed the KC is kent cams, (sorry that sounds a bit dim!)
have you tried their website??
charlie_mini
18-01-2007, 08:19 PM
Application (http://www.kentcams.com/product/prodDets.aspx?PartNum=600&CatID=1&PartID=24&VehPartID=2748&ModEngID=428#) Power Band (http://www.kentcams.com/product/prodDets.aspx?PartNum=600&CatID=1&PartID=24&VehPartID=2748&ModEngID=428#) Cam Lift(mm) (http://www.kentcams.com/product/prodDets.aspx?PartNum=600&CatID=1&PartID=24&VehPartID=2748&ModEngID=428#) Valve Lift(mm) (http://www.kentcams.com/product/prodDets.aspx?PartNum=600&CatID=1&PartID=24&VehPartID=2748&ModEngID=428#) Duration (http://www.kentcams.com/product/prodDets.aspx?PartNum=600&CatID=1&PartID=24&VehPartID=2748&ModEngID=428#) Timing (http://www.kentcams.com/product/prodDets.aspx?PartNum=600&CatID=1&PartID=24&VehPartID=2748&ModEngID=428#)
Fast Road 2000-7000 7.43 9.14 I 278 Deg E 274 Deg 33/65 63/31
Full Lift (http://www.kentcams.com/product/prodDets.aspx?PartNum=600&CatID=1&PartID=24&VehPartID=2748&ModEngID=428#) VC (mm) (http://www.kentcams.com/product/prodDets.aspx?PartNum=600&CatID=1&PartID=24&VehPartID=2748&ModEngID=428#) LTD C (http://www.kentcams.com/product/prodDets.aspx?PartNum=600&CatID=1&PartID=24&VehPartID=2748&ModEngID=428#)Required Parts (http://www.kentcams.com/product/prodDets.aspx?PartNum=600&CatID=1&PartID=24&VehPartID=2748&ModEngID=428#)
107 Deg 0.40I 1.98mm CF1 / VS2

is this any good??
Gr4H4m
18-01-2007, 09:57 PM
Evening all, does anybody know the timing figures etc for a KC 600 SB cam please? It's for a classic mini and is fitted in my turbo to my suprise:confused: , I was led to believe it was a phase2 but there you go :) I phoned a few places today but they were of no real help (normally after asking if I'd purchased it from them!!!) Any help will be appreciable as I want to finish it tomorrow :eek:


Will the Manufacturer not give you the spec?
redmini
19-01-2007, 12:16 PM
whats the SB? guessed the KC is kent cams, (sorry that sounds a bit dim!)
have you tried their website??

I thought kent cam when I first saw the KC, as for the SB I've not got a clue. I looked on a few sites last night but to be honest I've got the lurgy, so just went to bed instead :(
Gr4H4m
19-01-2007, 06:52 PM
Its not Keith Calver is it?
redmini
19-01-2007, 11:00 PM
Its not Keith Calver is it?

Kieth Calver doesn't profile cams lol I got the engine at mini45 in Esher a few years back, I traced it from the engine number to a Jonspeed Racing build but it seems it's been played about with since they last had it. As it's the first time I've had it in bits I can actually see what's been done to it, reground 1071 crank,omega forged pistons etc etc. It's still a good spec, mainly the gearbox that's different....and the cam :rolleyes: